The majority of angle grinders
have a fixed speed.
Most 4-½-inch models run
at 10,000 or 11,000 rpm.
The said, 7-inch and 9-inch models
run between 5,000 and 8,000 rpm.
A few angle grinders
have variable speed and
can run slow enough for
polishing or buffing.
Grinder's come in lots of
different disc sizes,
but the most common
sizes are 115mm (4 ½”)
and 230mm (9”). You can
purchase different discs/heads/
wheels depending on the task you
want to complete - just make sure
they're the right size for your grinder!
4' (100mm) angle grinders,
as the name suggests,
accept grinding discs up
to 100mm in size.
These grinders are relatively
small in size, and are suitable
for smaller jobs. The size of
disc that the grinder can accept
dictates the depth of cut that
the grinder can achieve.
Complete various grinding
applications and get fast
material removal with the 9-in.
4HP Angle Grinder. Featuring a
high-powered motor with
overload protection, this grinder
delivers 6,500 rpm for tough jobs.
The GA9060 weighs only
5.5 Kg and is built with
comfort and ergonomic
features for extended use.
The grinder features an ergonomic
rubberised handle with
trigger switch, and the gear
housing can be positioned
every 90 degrees for operator
convenience.
The majority of angle grinders
have a fixed speed.
Most 4-½-inch models run
at 10,000 or 11,000 rpm.
The said, 7-inch and 9-inch models
run between 5,000 and 8,000 rpm.
A few angle grinders
have variable speed and
can run slow enough for
polishing or buffing.
Grinder's come in lots of
different disc sizes,
but the most common
sizes are 115mm (4 ½”)
and 230mm (9”). You can
purchase different discs/heads/
wheels depending on the task you
want to complete - just make sure
they're the right size for your grinder!
4' (100mm) angle grinders,
as the name suggests,
accept grinding discs up
to 100mm in size.
These grinders are relatively
small in size, and are suitable
for smaller jobs. The size of
disc that the grinder can accept
dictates the depth of cut that
the grinder can achieve.
Complete various grinding
applications and get fast
material removal with the 9-in.
4HP Angle Grinder. Featuring a
high-powered motor with
overload protection, this grinder
delivers 6,500 rpm for tough jobs.
The GA9060 weighs only
5.5 Kg and is built with
comfort and ergonomic
features for extended use.
The grinder features an ergonomic
rubberised handle with
trigger switch, and the gear
housing can be positioned
every 90 degrees for operator
convenience.
C-Mart A3104-10 drill bit can drill on many different materials with drilling modes: slow drilling, fast drilling or hammer drilling
The product's compact design makes it easy to store without taking up much space as well as put it in a bag to bring to work.
C-Mart A3104-10 drill bit is made from high-quality materials to help the product become stronger and more durable over time.
18V XR Li-Ion compact hammer drill driver featuring 4.0Ah XR Li-Ion battery technologyPart of the intelligent XR Lithium Ion Series designed for efficiency and making applications fasterTwo speed all metal transmission for increased runtime and longer tool lifeFoot LED with delay feature for improved visibility and flashlight functionalityImproved ergonomic design with rubber grip over mould improving users comfortSteel belt hook and magnetic bit holder ensures strong storage solutions15 position adjustable torque control for consistent screw driving into a variety of materialsBrushless Motor Technology for excellent efficiencyLi-Ion battery packs allows for superior insertion and removal with state of charge indicatorIntelligent trigger design allows for total control of application
Voltage: 10.8 V
Max Torque (Hard): 24 Nm
Power Output: 180 Watt
Chuck Capacity: 1-10 mm
Max. Drilling Capacity [Metal]: 10 mm
Length: 185 mm
Depth: 50 mm
Large machine shop
drills use induction motors.
Oilwell drilling machines use
diesel motors or diesel-electric rigs.
Drilling rigs can be massive structures
housing equipment used to drill
water wells, oil wells, or natural
gas extraction wells, or they
can be small enough to be
moved manually by one
person and such are called augers.
Radial drilling machine.
Upright drilling machine.
Automatic drilling machine.
Multiple Spindle drilling machine.
The electric motor drives
the spindle either directly
with a gearbox or with a
series of belts and pulleys.
The electric motor can either
be mounted to the base of the
machine or at the top of the column.
Like the feed rate, the rotational speed
can be adjusted for different
drill bits and materials.
Designed for on and off
shore drill rig service,
bulk fuel terminals,
and transfer stations.
Designed to withstand
hazardous-duty applications
with demanding service factor
needs. Labyrinth style
recess shaft slinger increases
bearing life and multiplies
durability.
Workover rigs are very
similar to drill rigs in
that they are truck-mounted
mobile rigs that travel between
job sites on public roads.
However, these machines
are generally located at
the job site for weeks before
relocating to a different location.
The majority of angle grinders
have a fixed speed.
Most 4-½-inch models run
at 10,000 or 11,000 rpm.
The said, 7-inch and 9-inch models
run between 5,000 and 8,000 rpm.
A few angle grinders
have variable speed and
can run slow enough for
polishing or buffing.
Grinder's come in lots of
different disc sizes,
but the most common
sizes are 115mm (4 ½”)
and 230mm (9”). You can
purchase different discs/heads/
wheels depending on the task you
want to complete - just make sure
they're the right size for your grinder!
4' (100mm) angle grinders,
as the name suggests,
accept grinding discs up
to 100mm in size.
These grinders are relatively
small in size, and are suitable
for smaller jobs. The size of
disc that the grinder can accept
dictates the depth of cut that
the grinder can achieve.
Complete various grinding
applications and get fast
material removal with the 9-in.
4HP Angle Grinder. Featuring a
high-powered motor with
overload protection, this grinder
delivers 6,500 rpm for tough jobs.
The GA9060 weighs only
5.5 Kg and is built with
comfort and ergonomic
features for extended use.
The grinder features an ergonomic
rubberised handle with
trigger switch, and the gear
housing can be positioned
every 90 degrees for operator
convenience.
PRO CERAM VB DRY
Electroplated diamond drills
designed for drilling all types
of tiles found in the industry,
will also give outstanding
performance on hard and
brittle materials such as
marble, granite and porcelain.
Connection: 10mm
shank for 3 Jaw Chuck
Power Drills
Applications: For
dry or wet drilling
The drill driver is a compact, lightweight drill driver with non-stop power. It is mains-powered which makes it always ready for use. It has a long 6 metre cord for extra freedom of movement and a 10 mm double-sleeve keyless chuck for fast and easy accessory changing. The 20+1 VariTorque clutch setting ensures precise screwdriving with the 20 settings and another setting for drilling jobs. The variable speed gives versatility and control of your job.
Easy-to-adjust depth gauge to preselect drilling depth for blind holes
STEPLESSLY adjustable side handle for secure two-handed control
Forward/reverse switch for easily changing the working direction of the tool