Wrenches & Tubing Tools

View as Grid List
Sort by
Display per page
Picture of 10 Piece T Type Hex Wrench Set F0011

10 Piece T Type Hex Wrench Set F0011

F0011
10 Piece T Type Hex Wrench Set
₱486.00
Picture of 1-1/2" CONSTANT SWING COPPER TUBING CUTTER - 48-22-4252

1-1/2" CONSTANT SWING COPPER TUBING CUTTER - 48-22-4252

48-22-4252
Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.
₱5,280.00 ₱6,600.00
Picture of 8-Piece Double Box-end Wrench Set T0004

8-Piece Double Box-end Wrench Set T0004

T0004
8-Piece Double Box-end Wrench
₱1,200.00
Picture of 8-Piece Double Open-end Wench Set T0003

8-Piece Double Open-end Wench Set T0003

T0003
8-Piece Double Open-end Wench Set
₱1,000.00
Picture of Asian First Brand 1/2" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

Asian First Brand 1/2" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

CT-364A-08
1/2" Ridgid Type Tube Bender - Heavy Duty - CT364A Series
₱2,824.00
Picture of Asian First Brand 1/2" Tube Bender For Steel Tubing - Extra Heavy Duty - CT-366A-08

Asian First Brand 1/2" Tube Bender For Steel Tubing - Extra Heavy Duty - CT-366A-08

CT-366A-08
1/2" Tube Bender For Steel Tubing - Extra Heavy Duty - CT-366A-08
₱3,235.00
Picture of Asian First Brand 1/4" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

Asian First Brand 1/4" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

CT-364A-04
1/4" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series
₱1,059.00
Picture of Asian First Brand 3/4" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series

Asian First Brand 3/4" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series

CT-364A-12
3/4" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series
₱4,565.00
Picture of Asian First Brand 3/8" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

Asian First Brand 3/8" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

CT-364A-06
3/8" Ridgid Type Tube Bender - Heavy Duty - CT364A Series
₱1,882.00
Picture of Asian First Brand 3/8" Tube Bender For Steel Tubing - Extra Heavy Duty - CT-366A-06

Asian First Brand 3/8" Tube Bender For Steel Tubing - Extra Heavy Duty - CT-366A-06

CT-366A-06
3/8" Tube Bender For Steel Tubing - Extra Heavy Duty - CT-366A-06
₱2,235.00
Picture of Asian First Brand 5/16" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

Asian First Brand 5/16" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

CT-364A-05
5/16" Ridgid Type Tube Bender - Heavy Duty - CT364A Series
₱1,118.00
Picture of Asian First Brand 5/8" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series

Asian First Brand 5/8" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series

CT-364A-10
5/8" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series
₱3,824.00
Picture of Asian First Brand 7/8" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series

Asian First Brand 7/8" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series

CT-364A-14
7/8" Ridgid Type Tube Bender - Heavy Duty - CT-364A Series
₱5,059.00
Picture of Asian First Brand CT-999AL Tube Bender Set

Asian First Brand CT-999AL Tube Bender Set

CT-999AL
CT-999AL Tube Bender Set
₱10,353.00
Picture of Belt Wrench F0007

Belt Wrench F0007

F0007
Belt Wrench
₱390.00
Picture of BERNMANN 9Pcs. Extra Long Ball Point Hex Key - B-363-9SR

BERNMANN 9Pcs. Extra Long Ball Point Hex Key - B-363-9SR

B-363-9SR
9Pcs. Extra Long Ball Point Hex Key
₱865.00
Picture of BERNMANN 9Pcs. Extra Long Star Key - B-163-9SR

BERNMANN 9Pcs. Extra Long Star Key - B-163-9SR

B-163-9SR
9pcs. Extra Long Star Key
₱865.00
Picture of BERNMANN Adjustable Wrench (AP Series) B-AW-06AP

BERNMANN Adjustable Wrench (AP Series) B-AW-06AP

B-AW-06AP
Adjustable Wrench (AP Series)
₱1.00
Picture of BERNMANN Aluminum Pipe Wrench B-PW-36A

BERNMANN Aluminum Pipe Wrench B-PW-36A

B-PW-36A
Aluminum Pipe Wrench
₱1.00
Picture of BERNMANN Chain Wrench B-19ATLK

BERNMANN Chain Wrench B-19ATLK

B-19ATLK
Chain Wrench
₱576.00
Picture of BERNMANN Combination Wrench - DIN3113

BERNMANN Combination Wrench - DIN3113

DIN3113
Combination Wrench
₱1.00
Picture of BERNMANN Combination Wrench (14 Pieces) - B-02-624PB

BERNMANN Combination Wrench (14 Pieces) - B-02-624PB

B-02-624PB
Combination Wrench (14 Pieces)
₱3,000.00
Picture of BERNMANN Combination Wrench (14 Pieces) - B-02-832PB

BERNMANN Combination Wrench (14 Pieces) - B-02-832PB

B-02-832PB
Combination Wrench (14 Pieces)
₱4,560.00
Picture of BERNMANN Double Open End Wrench (12 Pieces) B-05-632PB

BERNMANN Double Open End Wrench (12 Pieces) B-05-632PB

B-05-632PB
Double Open End Wrench (12 Pieces)
₱3,420.00
Picture of BERNMANN Double Open End Wrench (8 Pieces) B-05-622PB

BERNMANN Double Open End Wrench (8 Pieces) B-05-622PB

B-05-622PB
Double Open End Wrench (8 Pieces)
₱1,620.00
Picture of BERNMANN Double Open End Wrench DIN3110

BERNMANN Double Open End Wrench DIN3110

DIN3110
Double Open End Wrench
₱1.00
Picture of BERNMANN Double Ring Offset 75° Wrench (8 Pieces) B-08-622PB

BERNMANN Double Ring Offset 75° Wrench (8 Pieces) B-08-622PB

B-08-622PB
Double Ring Offset 75° Wrench (8 Pieces)
₱2,376.00
Picture of BERNMANN Ductile Pipe Wrench B-PW-08D

BERNMANN Ductile Pipe Wrench B-PW-08D

B-PW-08D
Ductile Pipe Wrench
₱1.00
Picture of BERNMANN Extra Long Ball Point Hex Key - B-33-015SR

BERNMANN Extra Long Ball Point Hex Key - B-33-015SR

B-33-015SR
Extra Long Ball Point Hex Key
₱1.00
Picture of BERNMANN Sheet metal Grip B-8ATSMR

BERNMANN Sheet metal Grip B-8ATSMR

B-8ATSMR
Sheet metal Grip
₱445.00
Picture of Black Hawk 4-in-1 Tube Bender

Black Hawk 4-in-1 Tube Bender

4-in-1 Tube Bender
₱682.00
Picture of Black Hawk 64803A Tube Bender 3-in-1

Black Hawk 64803A Tube Bender 3-in-1

64803A
64803A Tube Bender 3-in-1
₱741.00
Picture of Chain Pipe Wrench F0008

Chain Pipe Wrench F0008

F0008
Chain Pipe Wrench
₱390.00
Picture of CHEATER PIPE WRENCH - 48-22-7314

CHEATER PIPE WRENCH - 48-22-7314

48-22-7314
Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.
₱5,180.00 ₱6,475.00
Picture of C-MART 2-JAW GEAR PULLER - B0040A

C-MART 2-JAW GEAR PULLER - B0040A

B0040A
C-Mart B0040A-12 is a product widely used in mechanical maintenance, car care and many other industries. B0040A-12 is made from good material so it does not wear out and rust over time, has high hardness, and holding depth can be adjusted. B0040A-12 has a neat design, making storage easier and convenient to carry when needed. Product B0040A-12 is highly durable thanks to being made from CR-V steel with high heat and force resistance...
₱168.00

C-MART 7 Pcs Ratchet Flexible - Flexible Head Gear Wrench - T0009

T0009
7PCS RACHET HEAD GEAR WRENCH
₱1,750.00

C-MART 8-PC BALL POINT HEX KEY SET-REAGULAR ARM - F0152-MM

F0152-MM
- The hexagon is an indispensable tool in the toolbox of mechanics and repair and installation specialists. In addition, this product can also be used in the home to repair some appliances very conveniently.
₱125.00
Picture of C-MART 8-PCS FOLDABLE HEX WRENCH SET - F0194

C-MART 8-PCS FOLDABLE HEX WRENCH SET - F0194

F0194
MADE FROM HIGH QUALITY ALLOY STEEL COMPLETELY HARDENED hrc:52-56 DEGREES
₱220.00

C-MART 8-PCS FOLDABLE HEX WRENCH SET - F0195

F0195
MADE FROM HIGH QUALITY ALLOY STEEL COMPLETELY HARDENED hrc:52-56 DEGREES
₱220.00

C-MART 9-PCS HEX KEY SET - F0191

F0191
C-MART 9-PCS HEX KEY SET
₱225.00

C-MART 9-PCS HEX KEY SET-EXTRA LONG ARM - F0193

F0193
C-Mart F0193 9-mm ball head hexagon set is a product trusted by many users because of its usefulness and convenience. C-Mart's genuine products are manufactured using modern Chinese technology, ensuring you will be more assured about the quality. C-Mart F0193 9-mm ball head hexagon set has undergone strict testing to meet design and quality requirements as well as ensure peace of mind for users. C-Mart F0193 9-mm ball head hexagon set is made from super hard steel, with high carbon content, so it is sturdy, can withstand high forces, and is resistant to bending and breaking. Meticulous and elaborate machining, ensuring that the surface is not scratched during work. C-Mart F0193 9-mm ball head hexagon set is made from high-quality materials that are anti-corrosion and rust-free for long-term use and longevity. C-Mart F0193 9-mm ball head hexagon set includes 9 items to help you be more flexible in your work. C-Mart F0193 9-mm ball head hexagon set is compactly designed so it's easy to carry or store in a toolbox conveniently and quickly. C-Mart F0193 9-mm ball head hexagon set is a high quality product used to easily open hexagonal locks. Widely used in repairing and maintaining cars, machinery, and industrial equipment, helping you complete the job faster and more effectively.
₱260.00

C-MART 9-PCS HEX KEY SET-LONG ARM - F0192

F0192
C-Mart F0192 9-mm ball head hexagon set is a product trusted by many users because of its usefulness and convenience. C-Mart's genuine products are manufactured using modern Chinese technology, ensuring you will be more assured about the quality. C-Mart F0192 9-mm ball head hexagon set has undergone strict testing to meet design and quality requirements as well as ensure peace of mind for users. C-Mart F0192 9-mm ball head hexagonal set is made from super hard steel, with high carbon content, so it is sturdy, can withstand high forces, and is resistant to bending and breaking. Meticulous and elaborate machining, ensuring that the surface is not scratched during work. C-Mart F0192 9-mm ball head hexagon set is made from high-quality materials that are anti-corrosion and rust-free for long-term use and longevity. C-Mart F0192 9-mm ball head hexagon set includes 9 items to help you be more flexible in your work. C-Mart F0192 9-mm ball head hexagon set is compactly designed so it's easy to carry or store in a toolbox conveniently and quickly. C-Mart F0192 9-mm ball head hexagon set is a high quality product used to easily open hexagonal locks. Widely used in repairing and maintaining cars, machinery, and industrial equipment, helping you complete the job faster and more effectively.
₱225.00
Picture of C-MART ADJUSTABLE WRENCH - F0002-12

C-MART ADJUSTABLE WRENCH - F0002-12

F0002--12
2 IN 1 ADJUSTABLE WRENCH, RUBBER GRIP
₱210.00

C-MART ADJUSTABLE WRENCH - F0201

F0201
C-Mart F0201-08 8" smooth hand wrench is made from high-quality materials to help make the product sturdy, rust-proof, and abrasion-resistant and durable over time. The handle of the product is coated with 2 layers of plastic, smooth and anti-slip. C-Mart F0201-08 8" smooth hand wrench is suitable for many sizes of screws and bolts with an opening of 0 - 30mm. The product has a smart design with the integration of 2 hexagonal screw holes on the body and a mouth ring on the handle. The product has a suitable size, can be used for many jobs, and is easy to store and put in a bag.
₱310.00

C-MART BALL POINT HEX KEY-EXTRA LONG ARM - F0017

F0017
C-Mart F0017-18.0 18.0mm ball head hexagon is a product trusted by many users because of its usefulness and convenience. C-Mart's genuine products are manufactured using modern Chinese technology, ensuring you will be more assured about the quality. C-Mart F0017-18.0 18.0mm ball head hexagon has undergone strict testing to meet design and quality requirements as well as ensure peace of mind for users. C-Mart F0017-18.0 18.0mm ball head hexagon is made from super hard steel, has high carbon content, so it is sturdy, can withstand high forces, and is resistant to bending and breaking. Meticulous and elaborate machining, ensuring that the surface is not scratched during work. C-Mart F0017-18.0 18.0mm ball head hexagon is made from high-quality materials that are anti-corrosion and rust-free for long-lasting use and longevity. C-Mart F0017-18.0 18.0mm ball head hexagon is compactly designed so it's easy to carry or store in a toolbox conveniently and quickly. C-Mart F0017-18.0 18.0mm ball head hexagon is a high quality product used to easily open hexagonal locks. Widely used in repairing and maintaining cars, machinery, and industrial equipment, helping you complete the job faster and more effectively.
₱115.00

C-MART HEAVY DUTY PVC PIPE WRENCH - B0005

B0005
- Product code: B0005-12 - Manufacturer: C-MART - Origin: China - Dimensions: 12" (300mm) - Material: Made of steel - My jaw is strong and strong - Hard to break, bend, highly durable - Anti-rust - Suitable for use in construction and installation projects
₱340.00

C-MART HEX 1/4" DR. - C0401

C0401
C-Mart C0401-H2.5 1/4" hexagon head screwdriver is made from sturdy material that can withstand high force, avoiding broken screw heads or cracking when used with great force. C-Mart C0401-H2.5 screwdriver bit is made from high-quality alloy for corrosion resistance, no rust, helping to use for a long time and prolong life. C-Mart C0401-H2.5 screwdriver bit is compactly designed so it's easy to carry or store in a toolbox lightly and quickly.
₱20.00
Picture of C-MART RATCHET WRENCH AND BIT SET - K0029

C-MART RATCHET WRENCH AND BIT SET - K0029

K0029
Material: CR-V steel is hard, light, heat resistant, good tensile strength, high elasticity, corrosion and abrasion resistant. Mechanism of 2 12-tooth one-way rotating ratchet wheels with reversing, can mount many different sizes. The mouth ring automatically locks one way, helping the user not need to lift the wrench after each turning operation. The wrench is tilted at a 15 degree angle, creating space for rotation. Easily open 12-point nuts, hexagons, star hexagons, grooves, broken bolts, square sizes 14 and 19. There are 9 separate hexagon heads (8-17mm), 1 18mm hexagon socket head, screw bit adapter, and 36 screwdriver heads. Hexagonal wrench, easy to replace accessories from the outside. There is a detailed numbered plastic box, easy to check to avoid loss. Compact, lightweight, easy to carry and use. Suitable for home tool sets, mechanics, vehicle repair technicians
₱1,250.00
Combination Ratchet Box Wrench Mirror Finished

Combination Ratchet Box Wrench Mirror Finished, 16651MB

16651MB
Combination Ratchet Box Wrench Mirror Finished
₱4,200.00
Picture of Cross Rim Wrench F0009

Cross Rim Wrench F0009

F0009
Cross Rim Wrench
₱525.00
Picture of Cross Rim Wrench, Rubber Grip F0010B

Cross Rim Wrench, Rubber Grip F0010B

F0010B
Cross Rim Wrench, Rubber Grip
₱480.00
Picture of Digital Bending Machine DB32

Digital Bending Machine DB32

DB32
Digital Bending Machine
₱180,000.00 ₱117,000.00

Flare Nut Wrench (Mirror Finished), 1105M

1105M
Flare Nut Wrench (Mirror Finished)
₱220.00

Hans Tools Box Wrench Set 75 Degrees (Silver) 16008M

16008M
Hans Tools Box Wrench Set 75 Degrees (Silver)
₱2,288.00
Picture of Hans 16512M Open Wrench Set

Hans 16512M Open Wrench Set

16512M
16512M Open Wrench Set
₱3,125.00
Hans Combination Plier With Side Cutting Plier 9"

Hans Combination Plier With Side Cutting Plier 9", 1827-9

1827-9
Hans Combination Plier With Side Cutting Plier 9"
₱638.00

Hans Combination Ratchet Box Wrench Set Mirror Finished Metric (Silver), 16658MUB

16658MUB
Hans Combination Ratchet Box Wrench Set Mirror Finished Metric (Silver)
₱3,800.00

Hans Tape Measure- Heavy Duty 3M X 3/4" Blade, 910-0319

910-0319
Hans Tape Measure- Heavy Duty 3M X 3/4" Blade
₱168.00

Hans Tool Locking Plier Straight Jaw, 1806

1806
Hans Tool Locking Plier Straight Jaw
₱398.00
Hans Tools Allen Wrench Extra H.D (CR-V)

Hans Tools Allen Wrench Extra H.D (CR-V), 1764M/1764A

1764M
Hans Tools Allen Wrench Extra H.D (CR-V)
₱658.00
Filters Close