Metallic Tubing

Beam Clamp Galvanized Available sizes 3/8" and 1/2" It's alternate way to attach metal without using welding or drilling

CONDULET LB AVAILABLE SIZES - 1/2" - 2"

CONDULET C AVAILABLE SIZES 1/2" - 2"

Condulet cover and gasket only AVAILABLE SIZES - 1/2" - 2"

CONDULET LL AVAILABLE SIZES 1/2" - 2" An LL conduit body is another two-hub version that forms an L shape. It diverts the raceway at a 90-degree angle and has an exit point on the left side of the body.

CONDULET LR AVAILABLE SIZES 1/2" - 2"

Condulet T Available sizes 1/2" - 2" T-shaped conduit bodies allow electricians to either merge wires from two different locations or route wires from one source to two separate locations. A T-conduit body is used to provide a junction point for three intersecting conduits, its form allows it to function as a juncture for three different paths.

Available sizes 1/2" - 2 " route individual electrical wiring conductors in a building or structure and protect the wires from impact, moisture, and chemical vapors.

ENTRANCE CAP CLAMP TYPE AVAILABLE SIZES 1/2" - 4 "

Fully threaded rod Steel is often used in applications where strength is the primary consideration AVAILABLE SIZES 1/4'' x 10' - 5/8" x 10'

IMC ELBOW Applications. The IMC bend is to connect the IMC pipes to change the way of the cable route. IMC Elbows allow 90 degree bends on corners saving time and material costs.

IMC PIPE Available Sizes 1/2" - 4" are unique materials that combine electrically insulating and electrically conductive materials to form a ceramic that can be heated to extreme temperatures using electrical resistance.

J Bolts, or Hook Bolts, are typically used for roofing applications.

Angle connectors are ideally suited for the corner connection of two wooden elements. AVAILABLE SIZES 3/4" - 4"

Available sizes - 1/2 " - 4" FNC is a flexible conduit designed to protect wiring in wet and damp locations. It's ideal for outdoor and underground applications, thanks to its liquid-tight properties.l

Liquid tight, flexible metal conduit has a polymer coating and requires sealed threaded fittings for a liquid tight seal. Sizes range from 3/8″ to 4”. This conduit is frequently installed outdoors, in wet operating conditions or burial underground.

Used to secure Rigid/IMC/EMT conduits parallel to beam or channel. SIZES AVAILABLE 1/2" - 3/4 " , 1"

EMT Conduit

EMT Connector Screw Type

EMT Coupling Screw Type

EMT ELBOW

Entrance Cap

Locknut

Square Box Deep GA 18 with 2 Screws

Square Box With Cover GA81

Steel Clamp Double Hole

Steel Clamp Single Hole