Wrenches & Tubing Tools

75 Degrees Box End Wrench

Hans Tools Linemans Plier 10-1/2"

75 Degrees Box End Wrench

Tactix Pipe Wrench 350mm(14 in.), 450mm(18 in.)

Hans Tools Allen Wrench Extra H.D (CR-V)

Combination Wrench Set Pro 8-32mm

Bolt Cutters

75 Degrees Box End Wrench

1/2" Ridgid Type Tube Bender - Heavy Duty - CT364A Series

C-Mart F0201-08 8" smooth hand wrench is made from high-quality materials to help make the product sturdy, rust-proof, and abrasion-resistant and durable over time. The handle of the product is coated with 2 layers of plastic, smooth and anti-slip. C-Mart F0201-08 8" smooth hand wrench is suitable for many sizes of screws and bolts with an opening of 0 - 30mm. The product has a smart design with the integration of 2 hexagonal screw holes on the body and a mouth ring on the handle. The product has a suitable size, can be used for many jobs, and is easy to store and put in a bag.

Hans Tape Measure- Heavy Duty 3M X 3/4" Blade

Ridgid Faucet and Sink Installer, Faucet Wrench, Change Plumbing Wrench Faucet Installation and Removal Tool

75 Degrees Box End Wrench

Ridgid Heavy Duty Pipe Cutter Wide-Roll Pipe Cutter w/ 1/8" - 2" Pipe Capacity

Ridgid Tube Bender, Level Type 310M Tube Bender

75 Degrees Box End Wrench

Description WR. SET COMBI. SLIMLINE 9-PC 10-19MM Features: Maxi drive and anti slip open ended jaw shape maintains grip on fastener with only slight rotational pressure

Tactix Carbon Steel Adjustable Wrench 150mm(6 in.), 200mm(8 in.), 250mm(10 in.), 300mm(12 in.)

MADE FROM HIGH QUALITY ALLOY STEEL COMPLETELY HARDENED hrc:52-56 DEGREES

Ridgid Conduit Bender, Hickey Type M (Handles Not Included)

Ridgid Ratchet Wrench For Knockout Punch Wrench, Ratchet 5/8 X 1"

Ridgid Tubing and Conduit Cutter Model 35S 1/4" To 1-3/8" Stainless Steel Tubing Cutter With X-Cel Knob, Silver

75 Degrees Box End Wrench

WRENCH SET BOX 75° O/S 8-PC 6-22MM

Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.

Hans Combination Plier With Side Cutting Plier 9"

Ridgid Ratchet Type Lever Bender Geared Ratchet Tube Bender

75 Degrees Box End Wrench

CUTTER 101 TUBING-40617

Nicholson Adjustable Wrench Black Phosphate Finish

75 Degrees Box End Wrench

Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.

CUTTER, 151 TUBING-31632

75 Degrees Box End Wrench

CUTTER 150 TUBING-31622

Ridgid Straight Pipe Wrench (8") Heavy-Duty Plumbing Straight Pipe Wrench - 31005

75 Degrees Box End Wrench

CUTTER 10 TUBING-32910

Hans Tools Allen Wrench Set Short Arm Allen Key (Standard)

Ridgid Straight Pipe Wrench (10") Heavy-Duty Plumbing Straight Pipe Wrench - 31010

75 Degrees Box End Wrench

Hans Tool Locking Plier Straight Jaw

Ridgid Straight Pipe Wrench (12") Heavy-Duty Plumbing Straight Pipe Wrench 31015

75 Degrees Box End Wrench

Ridgid Straight Pipe Wrench (14") Heavy-Duty Plumbing Straight Pipe Wrench 31020

75 Degrees Box End Wrench Set

Adjustable Wrench Black 10" (No. 213110NB)

Ridgid Straight Pipe Wrench (18") Heavy-Duty Plumbing Straight Pipe Wrench 31025

Hans Tools Open Wrench Set (INFINITE)

EMT PIPE BENDER WITH HANDLE

16008M Box Wrench Set 75 Degrees

16512M Open Wrench Set

Box Wrench ECO

Box Wrench PRO

STANLEY WRENCH COMBI.SLIMLINE

Cross Wrench

STANLEY WRENCH COMBI.SLIMLINE

Open Wrench