STAINLESS STEEL SUBMERSIBLE BOREHOLE MOTOR FOR 4" & 6" WELL CASING DIAMETER - MS4-20-1-1-T

Be the first to review this product
This depends upon the depth of the borehole to ground level and then the distance from the ground level to the final end point e.g. where the water tank is sited. The further the distance, the higher the pressure requirements of the borehole pump to prevent the water from trickling out. Submersible borehole pumps are a type of submersible pump. They are centrifugal pumps driven by a submersible motor. As they usually draw in the fluid directly without a suction line, they must constantly be submerged in the fluid handled. Starter borehole pumps can run for up to 24 hours. However, your everyday borehole pump will run between 6 & 8 hours. It is not good for your borehole pump to run continuously. If you run electrical pumps continuously, your utility bill will skyrocket.
SKU: MS4-20-1-1T
Vendor: Screwking Hardware Corp.
*

the measurement or extent of something from end to end; the greater of two or the greatest of three dimensions of a body.

Old price: ₱22,500.00
₱30,625.00
i h
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 3-5 days
Borehole pumps are a class of submersible pumps used to control water and liquid supply.
A borehole is a narrow shaft drilled vertically into
the ground which has dimensions that are
slightly larger than the borehole pump that is lowered into the borehole.
 

This depends upon the depth of the borehole
 to ground level and then the distance from the
 ground level to the final end point e.g. 
where the water tank is sited. The further the distance,
 the higher the pressure requirements of the borehole 
pump to prevent the water from trickling out.

Submersible borehole pumps are a type of
 submersible pump. They are centrifugal pumps
 driven by a submersible motor. 

As they usually draw in the fluid directly without a suction line, 
they must constantly be submerged in the fluid handled.
Starter borehole pumps can run for up to 24 hours.

 However, your everyday borehole pump will run between 6 & 8 hours.
 It is not good for your borehole pump to run continuously.
 If you run electrical pumps continuously, 
your utility bill will skyrocket.

 

Put simply the borehole should be as deep as
is required to reach the aquifer (water bearing rock).
The average depth of a borehole is between 80m and
120m but this can be less as well as significantly more.
 
0 review(s)
0.0 0
Write your own review Close
  • Product can be reviewed only after purchasing it
*
*
  • Bad
  • Excellent
*
*
*
*
Product tags
0 review(s)
0.0 0
Write your own review Close
  • Product can be reviewed only after purchasing it
*
*
  • Bad
  • Excellent