Screwking Hardware Corp.

Flat Washer - Metric Size

Self Drilling Screw Button Head

Sure Guard Gloves, Disposable Vinyl Gloves

DEWALT SMALL ANGLE GRINDER, SLIDE SWITCH + CORDED, 100W, 100MM, DWE8300S-B1

Electronic variable speed for total control in any application Rounded ergonomic industrial design allows easy and comfortable handling in any application Improved sealing for maximum protection from dust ingress ensuring long tool life Output air slots designed to protect users

The D25810K 12 lb. SDS Max Demolition Hammer is an ultra-light high-performance chipping hammer powered by 10.5 amp motor. The dependable and hard-hitting German engineered mechanism, delivers 7.1 joules of impact energy. With Constant Speed Under Load electronics, the D25810K is ideally suited for all day work on concrete and masonry walls, floor and wall channeling, and removing plaster and tile from floors, walls and ceilings. The Active Vibration Control® technology employed delivers reduced user vibration for less user fatigue and greater productivity.

Case,Small,Hardback with Laptop Liner,15.64" x 12.41" x 2.50" (39.7 x 31.5 x 6.4cm), 1.3kg (Black)

304 Stainless Flat Washer

Flange Nut - Metric

Hex Lag Screw, Hex Screw for Concrete

304 Stainless Steel Flat Washer

Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Snips. When shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.

Case,Small,8.41" x 6.76" x 3.87" (21.4 x 17.2 x 9.8cm),0.6kg (Black,Blue,Desert tan,Yellow)

Case,Small, 9.44" x 7.8" x 4.29", 0.8kg (Black,Orange,Desert Tan, Yellow)

Highest productivity due to an optimum balance of power, impact energy and vibration50% longer service intervals than the nearest competitor for lower running costs and less down timeRobust and proven design provides the longest lasting 16kg breaker

Case,Small,11.64" x 8.34" x 3.78", 1kg (Black,Orange,Desert Tan,Yellow)

11-piece Hole Saw Set(For Wood)

Case,Small,10.62" x 9.68" x 4.87" (27 x 24.6 x 12.4) 1.3 kg (Black,Desert Tan,Orange,Yellow)

The DeWalt DWE561 Compact Circular Saw is lightweight and easy to use with 65mm depth of cut. Its high power 1,350 Watt motor gives increased cutting performance, and the cutaway inner guard gives improved line of sight to cutting line. The DWE550 has a dust blower, which clears dust and debris from the cut line. The efficient dust extraction port minimises airborne dust particles when connected to a dust extraction unit. The circular saw has direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose.

DeWalt DWP849X-GB 150/180mm 1250W Premium Variable Speed Polisher

12-Piece Socket Wrench Set

12pt Regular Sockets

12pt Regular Sockets

Case,Small,10.62" x 9.68" x 6.87" 1.6kg, Black

Case,Small,13.37" x 11.62" 6" (33.9 x 29.5 x 15.2cm) 2kg (Yellow,Black,Orange)

140T SAW BLADE FOR WOOD FOR MTCS1400 CIRCULAR SAW-ARGMTCS1400SB140T

Case,Medium,Top Loader, 19.7" x 12" x 18" (50 x 30.5 x 45.7cm) 7.5kg,Black

Case,Medium 16.54" x 13.03" x 6.84" (42 x 33.1 x 17.4cm) 2.9kg (Black,Orange,Yellow)

Case,Medium 53 x 32.3 x 32.4cm, 5.7kg, Black

Case,Medium, 20.85" x 12.73" x 12.75" (52.9 x 32.3 x 32.4cm) 8.3kg (Black,Orange)