M18 FUEL DUAL BEVEL SLIDE COMPOUND MITER SAW (BARE TOOL) - M18FMS254-0

Cuts Faster and Weighs up to 40% less than corded saws while delivering up to 300 cuts per charge. Utilizing a POWERSTATE™ brushless motor the M18 CCS66- cuts faster than corded counterparts. A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. Circular saws may also be loosely used for the blade itself. Circular saws are a type of power tool designed to cut through wood and other construction materials. They feature a sharp circular blade which rotates at speed to create cross cuts and rip cuts and are available in a few different sizes determined by the size of blade they accept. There are blades designed for ripping lumber, crosscutting lumber, cutting veneered plywood and panels, cutting laminates and plastics, cutting melamine, and cutting aluminum. There are also general purpose and combination blades designed to work well in two or more types of cut. With a 13-amp motor and 20 tooth carbide-tipped blade, this saw is ready for any job. With a 2-7/16 in. depth of cut at 0 degrees, 1-7/8 in. depth of cut at 45 degrees and 1-11/16 in. A saw is a tool that's used to cut wood. It can be a hand tool or a power tool, and it usually has either a blade or a disk with a jagged cutting edge. The verb saw means to cut through wood or another material using a saw or other tool. A saw is a tool consisting of a tough blade, wire, or chain with a hard toothed the preferred material for saw blades of all kind. A saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge used to cut through material. Various terms are used to describe toothed and abrasive saws. Saws began as serrated materials, and when mankind learned how to use iron, it became the preferred material for saw blades of all kind. Circular saws are categorized by the diameter of the blade they take . The most common and useful size for DIYers is 7 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.