Hardware

Flat Steel File

Door Closer EN24 BCA/DC with standard arm, With Hold open silver, Silver Finish

15mm thick particle board DF Melamine woodgain.

DOUBLE CYLINDER DEADBOLT

STRUT CHANNEL PRE GALVANIZED & HOT DIP GALVANIZED (PLAIN/SLOTTED)

12" Air Chuck With Rubber Hose

Outdoor Laminated Steel Padlock

Yale Handleset-Double Handle Evoke Series Dimple Key Antique Brass

Round Steel File

Door Closer with Slide Arm , Silver Finish

15mm thick particle board DF Melamine woodgain.

- Entrance lockset - Model HCL01/ET - Residential and commercial applications - Backset 60mm (2-3/8") - Fits door with 35mm (1-3/8") - to 50mm (2") thickness

Concealed Hinges

RIGHT CUTTING OFFSET SNIPS - 48-22-4022 shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion.Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Sni They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.

Engine Cleaning Gun

Outdoor Laminated Steel Padlock

Yale Handleset Single Handle Evoke Series Dimple Key Antique Brass

Half Round Steel File

Ho Mechanism

Chain & Bolt EL650AB

15mm thick particle board DF Melamine woodgain.

FINISH: STAINLESS STEEL ANTIQUE BRASS BLACK NICKEL BLACK MATTE

HINGES 3.5X3.5X2.2MM STAINLESS STEEL YLGMLPHINGES35

Outdoor Laminated Steel Long Shackle Padlock

Yale Vertibolt Double Cylinder Dimple Key Antique Brass and Satin Nickel

Triangle Steel File

EN 3 Door Closer with slide channel arm , Silver finish

Door Guard - Polished Brass EL655AB

15mm thick particle board DF Melamine woodgain

Gr.3 sat. Stainless Steel Tubular Entrance