Products tagged with 'battery'
2.0AH RED LI-ION - M12B2
M12B2
As a rule of thumb your battery
charger should be 10% - 20%
of the Ah rating of the battery.
E.g A 100Ah battery would require
a 10 Amp charger as a minimum.
prevent overcharging, you
should keep the charger size
to within 30% of the total
capacity.
Single-cell batteries
have a lower power output
and a smaller size —
typically, the maximum
discharge current is between
1C and 3C (e.g. 1Ah = 1A to 3A).
This means that single-cell
chargers are often used for
smaller mobile devices,
such as phones, watches,
and headphones.
A battery charger is a
device that provides
Direct Current (DC) to
the battery to restore
the used-up electrolyte.
So ideally, when all the electrolytes
of the battery are restored,
it's current supply should stop.
A battery charger,
recharger, or simply charger,
is a device that stores
energy in a battery by running
an electric current through it.
The charging protocol
(how much voltage or current for how long,
and what to do when charging is complete)
depends on the size and
type of the battery being charged.
The 12V Battery Charger –
Model 5607-00 is a solid-state
battery charger designed to
charge your 12-volt battery
and maintain and hold it to
a full charge. The 12V Battery
Charger will keep your
battery fully charged and
can be plugged in for as long as you want.
So at what percentage
should you charge your phone?
The best practice for
preserving phone battery
health is to plug it in at around
20% and charge it up to 80-90%.
This is especially important if you
use fast charging,
as charging from 0%
will cause a lot of heat,
and from 80% up, fast charging
becomes less efficient.
Constant current (CC)
charging initially allows
the full current of the
charger during the BULK stage to flow
into the battery regardless
of the battery state of charge or the
temperature until the battery terminal
voltage reaches a pre-set steady state.
They're called alternating
current (AC) and direct current (DC) power.
The power that comes from the grid is always
AC. However, batteries,
like the one in your EV, c
an only store power as DC.
That's why most electronic
devices have a converter built
into the plug.
₱5,500.00
₱6,875.00
LOTUS 18V X-line 2.0Ah Battery Pack LTBP18G-2
LTBP18G-2
18V X-line 2.0Ah Battery Pack
₱3,495.00
₱2,970.75
SKIL 20V BATTERY PACK 5.0AH - BR1E3105AA
BR1E3105AA
FUEL GAUGE
LED CHARGE STATUS INDICATOR
₱9,000.00
SKIL 20V BATTERY PACK PACK - BR1E3102AA
BR1E3102AA
FUEL GAUGE
LED CHARGE STATUS INDICATORS
₱5,750.00
STANLEY BATTERY 2.OAH-STSB202
STSB202
2.0Ah battery that comes in 3 sizes - available both seperately & as part of a starter kit
Compatible with the entire STANLEY v20 range: SBD710D2K-B1, SBD715D2K-B1, SBH900M2K-B1, SBI810D2K-B1, SBW920M2K-B1, SCC500-B1, SCD700D2K-B1, SCD711C1H-B1, SCD711C2K-B1, SCD711D2KA-B1, SCD711D2K-B1, SCG400-B1, SCG400M2K-B1, SCJ600-B1, SB202-B1, SB204-B1, SC200-B1
Its protected from discharging in extreme temperatures from -30°C to +75°C
It gives more run-time for your Stanley tools. Vigorously tested for moisture ingress, thermal shock, drop & vibration
₱2,407.00
STANLEY BATTERY 4.0AH-STSB204
STSB204
4.0Ah battery that comes in 3 sizes - available both seperately & as part of a starter kit
Compatible with the entire STANLEY v20 range: SBD710D2K-B1, SBD715D2K-B1, SBH900M2K-B1, SBI810D2K-B1, SBW920M2K-B1, SCC500-B1, SCD700D2K-B1, SCD711C1H-B1, SCD711C2K-B1, SCD711D2KA-B1, SCD711D2K-B1, SCG400-B1, SCG400M2K-B1, SCJ600-B1, SB202-B1, SB204-B1, SC200-B1
Its protected from discharging in extreme temperatures from -30°C to +75°C
It gives more run-time for your Stanley tools. Vigorously tested for moisture ingress, thermal shock, drop & vibration
₱3,982.00