Electrical | Light

Liquid tight, flexible metal conduit has a polymer coating and requires sealed threaded fittings for a liquid tight seal. Sizes range from 3/8″ to 4”. This conduit is frequently installed outdoors, in wet operating conditions or burial underground.

CONDUIT FITTINGS & CLAMPS LOCK NUT AVAILABLE SIZES Sizes : 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/2" , 3" , 3 1/2" , 4"

18V X-line 2.0Ah Battery Pack

18V X-line Work Light

20AMP Battery Charger

30AMP Battery Charger

350AMP Battery Charger

3-IN-1 350 Lumen Flashlight

450AMP Battery Charger

50AMP Battery Charger

6000 Lumen LED Worklight

650AMP Battery Charger

Battery 1.5AH X-LINE

Battery 18V 4.0AH X-LINE

Car Battery Charger

Fast Charger 12V X-LINE

Fast Charger 18V X-LINE

LTFL1400 Flashlight 3 LED

LTFL2000D Flashlight 7 LED

LTHL3331 12LED 60LM Headlamp

LTHL3331 Headlamp 12 LED

Rechargeable Flashlight LED

LOW PROFILE,W/LIGHT,5- BLADES 52" WHITE-HF24981

Luminaires LED Ceiing Bulb

The M12 LED High Performance Area Light has an impact and chemical resistant lens able to withstand the toughest of job site conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the job site. The high efficienc y and directional nature of LEDs makes them ideal for many industrial uses. LEDs are increasingly common in street lights, parking garage lighting, walkway and other outdoor area lighting, refrigerated case lighting, modular lighting, and task lighting. This scale runs from 1500 degrees Kelvin (about the color of a candle) up to 9000 degrees Kelvin (the same amount of light from a bright blue sky). The scale shows a warm yellow tone up to a cool blue tone. The higher the degree of Kelvin, the whiter and brighter the light will appear. Lumens measure how much light you are getting from a bulb. More lumens means it's a brighter light; fewer lumens means it's a dimmer light. A flashlight with a 1500 lumen can illuminate a distance up to 250 m or above, as it refers to one of the most powerful and strongest lightning types. Moreover , this type of light helps in observing objects from a far distance. LEDs consume less power, and they require low operational voltage. No warm-up time is needed for LEDs. The emitted light is monochromatic. They exhibit long life and ruggedness. On packaging, the lumen rating is indicated by a number followed by "lm," the abbreviation for lumens. The higher the lumen rating, the brighter the bulb will be.

The difference between Milwaukee's FUEL range and their standard brushless M18 tools is that FUEL has a much more powerful POWERSTATE brushless motor. According to Milwaukee, it is 4 times more powerful! The POWERSTATE Brushless Motor delivers more application speed, torque and durability in a more compact form. Overall, M18 FUEL tools are worth the investment for professionals and daily users who require top-tier performance, durability, and advanced features in their tools. For weekend warriors and DIYers with lighter tool usage, standard M18 tools may provide sufficient functionality at a more budget-friendly price point. The M18 tools are 18 volts while M12 are 12 volts. All new Milwaukee compact tools have POWERSTATE™ brushless electric motor technology supported by Milwaukee REDLINK Plus™ energy source intelligence. One of the great things about Milwaukee's M18 and M18 Fuel systems is that all the tools work on the same RedLithium M18 batteries . So, no matter if you use Milwaukee brushed tools, compact tools, or their flagship ONE-KEY models , all M18 tools and products run on the same 18V RedLithiuum batteries. Delivering unrivalled performance in a compact structure, all M18 FUEL™ products feature three Milwaukee® exclusive innovations: The POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack and REDLINK PLUS™ Intelligence Hardware and Software. These deliver unmatched power, run-time and durability on the jobsite.

Lithium and lithium-ion (or Li-ion) batteries are commonly used to power computers, cell phones, digital cameras, watches and other electronic devices.

The Milwaukee M18 B5 5.0Ah 18V Li-Ion Battery is designed for the 18V range of Milwaukee power tools. Even when compared to other Li-Ion batteries, or even to previous Milwaukee batteries, this batter produces 2x more runtime and up to 20% more power. Compatible with all Milwaukee M18 cordless tools, the M18 Lithium-Ion XC High- Capacity Battery delivers 3Ah (54 watt hours) of run time even in sub-zero temperatures. It provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite. The REDLITHIUM™ HIGH OUTPUT™ HD12. 0 battery is fully compatible with 150+ M18™ solutions. Store battery packs at room temperature away from moisture. Do not store in damp locations where corrosion of terminals may occur. As with other battery pack types, permanent capacity loss can result if the pack is stored for long periods of time at high temperatures (over 49°C). Under normal household use, the useful life of a 18v NiCd battery is 150-200 full charge cycles before the user will feel that the battery should be replaced. Battery life may vary depending upon factors, including but not limited to, charging conditions, battery maintenance, storage, and environmental conditions. As a general practice, it is best to unplug battery chargers and remove batteries when not in use. No battery pack damage will occur, however, if the charger and battery pack are left plugged in. 12V and 18 V Li-Ion batteries in the 12 and 18 V Li-Ion Combo Charger. If you demand maximum power and extended runtime for grueling tasks, the 12.0 Battery is the undisputed choice. Table saws and rotary hammers significantly benefit from a higher output battery like the Milwaukee M18 12. 0 Battery. Do not expose a battery to temperatures above 60 °C (140 °F). Keep the battery away from children. Avoid exposing the battery to excessive shock or vibration. For example, during charging, the battery pack must speak to the charger, or overcharging can happen. What's an overcharge? If the battery charges beyond its capacity, the cell will break down and cease to work (or worse).

The Milwaukee M18 B5 5.0Ah 18V Li-Ion Battery is designed for the 18V range of Milwaukee power tools. Even when compared to other Li-Ion batteries, or even to previous Milwaukee batteries, this batter produces 2x more runtime and up to 20% more power. Compatible with all Milwaukee M18 cordless tools, the M18 Lithium-Ion XC High- Capacity Battery delivers 3Ah (54 watt hours) of run time even in sub-zero temperatures. It provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite. The REDLITHIUM™ HIGH OUTPUT™ HD12. 0 battery is fully compatible with 150+ M18™ solutions. Store battery packs at room temperature away from moisture. Do not store in damp locations where corrosion of terminals may occur. As with other battery pack types, permanent capacity loss can result if the pack is stored for long periods of time at high temperatures (over 49°C). Under normal household use, the useful life of a 18v NiCd battery is 150-200 full charge cycles before the user will feel that the battery should be replaced. Battery life may vary depending upon factors, including but not limited to, charging conditions, battery maintenance, storage, and environmental conditions. As a general practice, it is best to unplug battery chargers and remove batteries when not in use. No battery pack damage will occur, however, if the charger and battery pack are left plugged in. 12V and 18 V Li-Ion batteries in the 12 and 18 V Li-Ion Combo Charger. If you demand maximum power and extended runtime for grueling tasks, the 12.0 Battery is the undisputed choice. Table saws and rotary hammers significantly benefit from a higher output battery like the Milwaukee M18 12. 0 Battery. Do not expose a battery to temperatures above 60 °C (140 °F). Keep the battery away from children. Avoid exposing the battery to excessive shock or vibration. For example, during charging, the battery pack must speak to the charger, or overcharging can happen. What's an overcharge? If the battery charges beyond its capacity, the cell will break down and cease to work (or worse).

The difference between Milwaukee's FUEL range and their standard brushless M18 tools is that FUEL has a much more powerful POWERSTATE brushless motor. According to Milwaukee, it is 4 times more powerful! The POWERSTATE Brushless Motor delivers more application speed, torque and durability in a more compact form. Overall, M18 FUEL tools are worth the investment for professionals and daily users who require top-tier performance, durability, and advanced features in their tools. For weekend warriors and DIYers with lighter tool usage, standard M18 tools may provide sufficient functionality at a more budget-friendly price point. The M18 tools are 18 volts while M12 are 12 volts. All new Milwaukee compact tools have POWERSTATE™ brushless electric motor technology supported by Milwaukee REDLINK Plus™ energy source intelligence. One of the great things about Milwaukee's M18 and M18 Fuel systems is that all the tools work on the same RedLithium M18 batteries . So, no matter if you use Milwaukee brushed tools, compact tools, or their flagship ONE-KEY models , all M18 tools and products run on the same 18V RedLithiuum batteries. Delivering unrivalled performance in a compact structure, all M18 FUEL™ products feature three Milwaukee® exclusive innovations: The POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack and REDLINK PLUS™ Intelligence Hardware and Software. These deliver unmatched power, run-time and durability on the jobsite.