You have no items in your shopping cart.

Products tagged with 'blade'

Filters
per page
utility knives snaps off in segments to remove worn cutting edges and expose sharp ones. Their sliding lever moves the blade strip into and out of the knife handle to retract and extend the cutting edge. A utility knife is generally six inches long and works well for slicing fruit, tender pieces of meat, or sandwiches. As the “knife of all trades,” it's a handy go-to for the everyday chef. “Snap-off blades have so many advantages: they allow for longer blade exposure; they're convenient, safer, versatile and always ready to use – and you'll have quick access to fresh, always-sharp blades. OLFA® STAINLESS STEEL™ blades are sharper than most other snap-off blades in the world, and rust-proof. This makes them perfectly suitable when things can get a little wet or moist. Utility knives are used to cut and trim a variety of building materials including: drywall, felt paper, wallpaper, rope & twine, plastic sheet material, fiberglass insulation and more. They can be divided into 3 general categories, Retractable Blade, Fixed Blade and Snap-off Blade. Utility knives usually only expose about 3/4-inch of the blade, so you have a limited cutting depth. Snap-offs retract around a couple of inches if you need to make a deeper cut in something like foam insulation.
₱905.00 ₱724.00
There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.
₱437.00 ₱350.00
There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.
₱9,250.00 ₱7,400.00
₱100.00
KNIFE BLADES 9MM 10PCS, 18MM 10 PCS S/O BLADE Q-PT 25MM 10PCS
₱110.00
Snap-Off & Quick Point Blades
₱315.00
₱100.00
MaxSell Basic Cutting T-Shank Jigsaw Blade for Metal
₱389.00
MaxSell Basic Cutting T-Shank Jigsaw Blade
₱355.00
MaxSell Combination of RIP and Cross Cut (Circular Saw Blade)
₱779.00
MaxSell Continuous Rim (Diamond Blades) for Wet Cutting
₱469.00
MaxSell Deluxe Cutting Blade (Diamond Blades)
₱389.00
MaxSell Fast Straight and Fast Curve Cutting U-Shank Jigsaw Blades
₱104.00
MaxSell Planer Blade
₱379.75
MaxSell Premium Turbo (Diamond Blades)
₱489.00
MaxSell Standard (Circular Saw Blade) for Plywood
₱820.00
Close